Thursday, 8 May 2014

Brick by Brick Constructing a New Era


Clay Bricks
'Bricks' are such materials which plays an important role in the field of construction. Its usage is not only limited to the construction of infrastructure but it is used for making any kind of wall or dams or for flooring etc in almost all the fields and places. As bricks are used from decades in different ways, people used to make them according to their needs and convenience. Mostly little kind of bricks is commonly used in the field of construction such as: clay bricks, cement bricks & fly ash bricks. These are such kind of bricks which are highly used in the field of construction. Its usage differs by place to place.

Clay Bricks

If any construction is happening deep inside the small village's people commonly prefers to use clay bricks because the availability of clay is easy in those areas & making such bricks are easy in those areas.

How to make clay bricks: Well as the name defines it needs clay to make such kind of bricks. All what required is clay and water just mix clay with water and place it in moulds and keep it in sunlight for 5-6 days when it becomes hard remove it from moulds and keep it inside the special room where it is burning from all the sides after few time your brick is ready to use. These bricks become very strong and durable due to the heating therapy which has been performed in the end. In villages where cement bricks are not available easily, peoples their use these kinds of bricks for making small bridges, houses and for flooring also. These bricks are very strong and give long services as well. If one is comparing these bricks with cement bricks it has been proved that these bricks are far much better than cement bricks in two ways:
  1. Bricks made by clay is eco friendly and it manufacturing process required no chemical of machinery but only water and clay and in any single mean it does not affect the atmosphere so it is very eco-friendly. Due to this property experts suggested big builders to use such kind of bricks in modern construction as well but due to unavailability of clay in urban areas somehow it is an impossible task yet now.
  2. Clay bricks have cooling tendency due to which outside temperature does not affect inside temperature of building in any way.
In urban areas contractors but so many technologies and efforts to maintain the inside temperature but in rural areas due to the use of clay bricks it becomes so easy to maintain the inside temperature to less and cool. Due to these two properties clay bricks are more better than cement bricks but in terms of durability and strength both kind of bricks cement made and clay made are almost same or in few situations cement bricks have more strength and durability as compared to clay bricks. If clay bricks are heat up in proper heat after drying in sunlight than the strength and durability of clay bricks and cement bricks are almost same. But due to unavailability of materials and some other conditions in both the places other options are not working like in urban areas it is next to impossible task to use clay bricks even after knowing its benefits and properties due to lack of materials same as in rural areas it is just impossible to use cement bricks because of no sources of manufacturing such kind of bricks. So according to material availability and manufacturing comfort different kinds of bricks are using in different areas of construction in various places.
        
Cement Bricks
Cement Bricks


It's another type of brick which is very easy to make need no heating process and gives long life to your infrastructure and strengthens the buildings and gives durability as well. The strength of cement bricks are of 7-10 MPa which is commonly used in below mentioned applications:
  • In residential building
  • In different kinds of walls
  • In small kind of DIY jobs
  • For making dams
  • In footpath
  • For different kind of flooring
Above mentioned are just few examples where cement bricks are commonly used. Usage of cement bricks does not cling to these one's only it leads to manufacturing of canals, bridges, malls, big bungalows and in almost all kind of construction.

What makes cement bricks different from other kinds of bricks is its strength and looks and also due to one factor if you use cement bricks in making any wall or for flooring etc you need very less amount of plaster to join and cover it because the bricks are already made up of cement they need less amount of plaster to bind each other. And because the wall is made up of cement bricks it have more strength as compared to walls which are made up of normal kind of bricks also because of these bricks the life of building increases.
   
How to make cement bricks: It is a simple task to make cement bricks all what requires is high quality cement and water if you are making pure cement brick and if you are working on less budget you can mix good quality of cement in it also, but remember put only a particular amount of sand in cement otherwise the manufactured bricks will lose their strength and it also results breakage. According to your need and requirement mix cement and water or cement water and sand and form a fine paste avoid the formation of lump now place this fine paste in moulds before putting in it moulds don't forget to grease it with mould release oil which is commonly known as shuttering oil. After this place the mould in which you pour paste in sunlight for 3-4 days then remove it from mould and it is ready to use for different kind of modern construction process.     

Advantages of using cement bricks

Using bricks which are completely made up of cement for building your house or any other infrastructure is a unique way to go. Due to its high strengthen property the building last very long.

You can make cement bricks according to your need; you can also change its size such as width, breath, height etc. General phenomena of cement bricks: weight: 2.3 kgs appox. & size is 220mm x 100mm x 70mm, its approx. quantity / pallet: 500 and strength is 7-10 MPa. As all know that cement never stops curing so because of this it increase its strength constantly.

Monday, 5 May 2014

Mold Release Oils Differ For Every Industry

Release oil or releasing agent is basically a chemical which protects the surface from bonding to other impure materials which can affect the product quality. This oil is commonly used for mold release, plastic release or tire and other product release.

Why release agents are important:
While manufacturing any kind of product like tires, plastic or cement pipes, wires etc. you have to apply a fine quality of release agent (oil) on the inner surface of mold so that the mixture you put in mold can release easily after completion of product. One another major reason is there because of which the use of mold release oil becomes very necessary- now days where everyone wants a well finished goods it's become a compulsion for manufacturers to make fine quality products which looks exactly perfect. While you use ordinary oil for mold release it leaves marks on the product surface while if you use fine quality of oil in mold surface, when you release the completed product from it, it gives a fine shine and you will find no stain on the product surface.         

As every industry has something different to produce so the releasing agents used in molds are also different. For releasing of concrete products from mold different kind of releasing agents or oils are used and for rubber, steel, aluminum other kind of oil are used, so always remember never make a mistake by using same kind of oil for releasing of molds of different products. 

Every industry like food, paper, plastic, rubber etc. require mold release agents for the products they manufacture. Following are some examples of different industries and how releasing agents work in these industries.

Food industry: In food industry oil is used for the separation of food from the containers. For this industry the oil used in molds should be eatable and do not cause any affect on health.  

Paper industry:  In paper making industry release agents are used to give slip effect on papers.

Plastic industry: While manufacturing any kind of product which is made by plastic mold release agents are used to prevent adhesives bonding to surface of plastic.

Rubber industry: For molding of rubber silicon based agents are used because rubber can easily absorb oil, so it should be necessary to use such release agent which cannot be absorbed by rubber and act as a good release agent.

For every individual industry there are some specific needs of product so release agent should be used very carefully so that it works beneficially for the manufactured product. You can find some people in market that will convey you that same kind of oil can act as best shuttering oil  for every industry but before trusting on such commands make a analysis of products and their behavior, can you use same kind of release agent for rubber and concrete mold release obviously not. So make a good analysis of your product and use release agents according to product behavior. It will give your product a new, stain free and perfect look which will increase the demand of your product.

Thursday, 20 February 2014

Chemicals and Machineries are Making New Era of Construction

Image Source : Flickr
Construction a term which plays a vital role in changing our life style, each and every thing from a building to mall and roads, bridges on which we daily travel are the result of good and high-tech construction and to make these constructed buildings and infrastructures best and error free in every possible way chemical contributes a lot. In previous era where time was not a hectic matter, constructer built infrastructures in years they give every possible effort to make the building strong and long lasting by curing them for months with water. But now the scenario is just opposite, contractors are always in hurry to match the dead lines of their projects. They have to complete big infrastructures like flyovers, bridges and big road projects like four lanes etc in the time spam of few months.

Is this sound weird? For this much big projects the deadline given is not more than eight-ten months or it exceeds to a year.

How can contractors give the perfect strength to these roads and bridges, building etc? Here the experts realize that it becomes necessary to take using chemicals which can help to complete the structures of construction in less time. After the use of chemical start in this industry it has been observed that the complex things become so easy and consumes very less time as compared to time taken in previous activities. Construction industry is a wide and rapidly changing sector and where perfection pays the return value of money.

From chemicals to machineries every technology in construction industry has its own unique position and it plays an important role in making any of the infrastructure life malls, residential apartments etc. or big projects like manufacturing of dam’s airports, tunnels and bridges etc, you can’t perform any of the construction process with the use of machineries and chemicals, both size and affectivity differs as per the project. Like for making building the machineries used are small like mixer for mixing the concrete and cement together or fitting machine for tile fixing etc and in huge construction projects like dam and tunnel making the machines used are heavy and giant, machines like JCB are used for digging land and making space for the structure which is supposed to be made on that place etc. Same as machineries usage of chemicals also vary from project to project, such as foaming agent- a type of chemical which form bricks that are light weighted when mix with fly ash and cement another chemical which is used in building construction in various shuttering oils which act as an releasing agent when put on sintering while making roofs of any building.

It has been clear that as the size and requirement of project changes the more and size of machineries change and the chemical choose for projects will vary according to their workability and affectivity. More or less, huge or small but construction industry needs chemical and machineries both for delivering best and high-quality results to everyone.   

Sunday, 16 February 2014

Why Curing is Necessary?

(Curing of Concrete) Image Source : Flickr
Curing helps to keep the moisture of concrete inside it which plays a vital role in gaining strength of fresh layer and prevent it from forming cracks.

Ways of curing:

There are commonly two major ways to cure concrete.
  1. Traditional curing
  2. Chemical curing
Traditional curing: This technique is decades older or we can say from when the cement come in use from that time this traditional curing is use to cure the fresh surface of concrete. We are familiar with the term traditional curing by the name of water curing; it is very common way to cure concrete of cement fresh layer.

Chemical curing: This technique introduced in very recent time and becomes important due to the high-tech requirements of construction. Chemical curing means  a chemical which is well-known as curing compound is spray on the fresh layer of cement or concrete after 2 hours to cure the surface from high temperature, wind, humid and dust materials so that the moist of concrete stay inside and gain the desired strength.
  
Why it becomes important to use chemical curing instead of traditional curing?

Well as the world is moving ahead by every passing year so as the construction industry. And as we are gaining so much comfort equipment from our high-tech societies there are few thing which are reducing rapidly and we can't use them the way we are using it in earlier time. The major ones are natural resources, due to global warming and some other atmospheric issues we can’t use plenty and plenty of water just for curing. Water is a natural resource and we can’t waste it just by putting gallons of water for curing our fresh layered concrete surfaces. By taking this situation in mind scientists make curing compound which did the same job as water did for curing and it doesn’t waste any natural resource neither it affects the atmospheric layer at all. And it just form a fine white layer on the surface which prevent the concrete from heat and other damages which caused by atmosphere.

How to use curing compound

Image Source : Flickr
Using curing compound doesn't need that you have an expert of using it, all you need is to have a bit and exact knowledge of how to use these chemicals to gain desired results.

Take curing compound; don't dilute it with water or any other liquid. Once the concrete layer settles down, normally it takes about 3-4 hours (Time will vary according to atmospheric conditions). It is very important that the surface of concrete is not dry it should damp. Because due to dry surfaces it prevent to form correct film and leads to absorption of curing compound, which requires more and more curing compound to form a enough layer on surface and it causes difficulty in removal also. When you are sure that the surface is in its best condition to apply curing on it, spray curing compound on the surface with the help of spray nozzle. Make sure that the nozzle is away from the concrete surface about 450mm and the pressure of pump should keep up in a frequent way so that it results a fine and even spay over the surface. Repeat the spraying process twice so that no place can leave dry. When curing application is applied on surface there is no further need of any application of material needed.  

It is compulsory, not to disturb the surface until it gain a sufficient amount of strength.

Take care of applied film and don’t open the surface for walking before the chemical dries completely. 

Areas of Application

You can use this chemical on any surface like plaster/concrete where curing is required.
  • Decks of bridges
  • Dams and canals
  • Towers
  • Walls and rams
  • Highways
  • Industrial and hospitals floor
  • Runways
  • RCC sections
How much time curing takes to remove completely?

If you are planned to place another layer or want to apply tile or stone on the concrete surface where you applied chemical for curing then it is very important to remove each part of chemical before lying of further layer on that surface.

This is because curing compound is just like a thin-film which lied just above the surface of concrete layer and due to this reason it is able to lock the moisture of concrete inside the layer, but this is the adverse part as well because it causes no connection between concrete surface and the material which supposed to applied on the layer and due to which the tile stone or paint can't hold the surface which results either they cannot find any grip and unable to apply or it they find a bit grip after sometime they will lose it the leave the surface.

So remove the curing layer before applying anything on surface. Avoid usage of acid for removing the film instead of it prefers the use of detergent for removing process. Once the film removes completely now the surface is ready for your further use you can either apply paint on it or fix stones or anything else. But make sure that the thin-film removes completely there is a very simple step for checking the status of surface that either it is free from curing chemical or not just pour a little amount of water on the surface if water absorbs then there is no chemical present on surface but if water remains on surface then you have to clean the surface again.       

Features and benefits of using curing compounds
  • If curing compound applied as per direction it forms a thin layer which keeps the moisture inside concrete.
  • It reduces the temperature of surface and protects it from sunlight and dust.
  • Reduces possibility cracking which normally caused due to moisture loss.
  • It is a non flammable and non toxic chemical
  • It doesn’t cause any harm to atmosphere. Rapid film formation
Conclusion

This chemical is beneficial and easy to use and as per today's requirement of construction and nature it is the best option for curing.

Monday, 27 January 2014

How Mould Release Agents Works

In recent time manufacturing of everything is taking place through machineries from huge pipes to small bolts and nuts almost everything. Different techniques has been introduced in this field for manufacturing various kind of things as everything has its unique quality and it requires different atmospheric condition to settle down from liquid to a strong structure. There are a lot of process perform in between a raw material to complete structure of anything like pipe, cement window structure or anything else.  

Very first step you need to do is make a mixture of desired material from which you suppose to make a structure of any shape like pole or anything, put the mixture in mould. Moulds are different so pick one according to your need; first apply mould release agent inside the mould. Make sure that the inside surface of mould where you suppose to apply oil is clean free from dust and previous materials as it directly effects the shape of your new pipe. After applying the oil put the mixture in mould, there are various technique present to perform this process one common among them for manufacturing pipe is rotation of downside wheels on which the mould is placed.

This will help to place the mixture evenly on the walls of mould, and then leave it for some time. Consumption of time required settling down and formation of hard and strong structure vary from place to place as the atmospheric conditions effect the results. Once the mixture gain required strength remove it from mould your pipe is ready to sell or for your personal use.

Why mould release agent is necessary:

Answer of this question can be understandable through an example: Commonly we all make cake in our home what we usually did collect all the raw materials mix them together in form of batter and place it in microwave container before putting the batter in that container we apply butter or something that is sticky which stay away the batter form the upper surface of container. The reason to put this greasy thing; it make easier to release the resulted content after heating. Shuttering oil perform the exact work for different structures that is related to process of manufacturing of anything.

How to use:

Mould release oil Manufacturer suggest to clean the surface of mould completely and put mould release agent according to product need like for pipes and other structure that are made up with the help of cement, concrete or sand required different type of release agent whether rubber pipes required different kind of releasing agent due to absorption nature of rubber it is very important to choose release agent according to material’s nature then only it works in a beneficial way for manufacturing process.

There are numbers of Shuttering oil manufacturers in India you can find mould release agent in their factories or outlets before buying ask the manufacturer to suggest the oil according to your material.

Wednesday, 15 January 2014

Introduction of Various Shuttering Oils and its Different Use

Mould release agents, they are basically provide a quick, easy and very clean stripping of shutter, mould and form. And it also ensures about the good and high quality of concrete and due to it the concrete becomes fair faced and stain free as well. The product (shuttering oil) is capable in working on different platforms like wood, steel, plastics and also on aluminium formwork etc. There is variety of mould oils available all across the globe, which cover almost all the major applications and it also, ensures about the maximum satisfaction of user.

Some common and most famous, beneficial shuttering oils are:
  • (DSO) it's abbreviated of De-shuttering oil: - This kind of oil can be diluted by water it is a shuttering agent or you can called it mould release agent as well. The diluting ratios of this will be 1:3 to 1:5.
  • (DSOE) it's abbreviated of De-shuttering oil emulsion: - These kinds of oil need no dilution it is ready to use kind of material. Water dilution is not required in such type of oils.
  • (DSOC) it's an abbreviated of De shuttering oil concentrate: - It is water dilute-able shuttering oil or we can say it is mould release agent. This oil can be diluted with the ratio of 1:5.
  • Mould release agent or (MRA ALU):- This oil can be used for aluminium shuttering or formwork of aluminium systems.
  • Mould release agent or (MRA MC):- It can be used for block machines of concrete or brick as mould release.
  • Mould release agent or (MRACLC):- This kind of oil can use for bricks and CLC blocks.
  • Mould release Agent or (MRA CP):- This is that kind of mould release agent which is ready to use kind of product which can be easily used for Pipes, sleepers and poles etc.
  • Mould release agent or (MRA RM):- Commonly there are two different types of rubber mould release agent they are: Silicone based and Silicone emulsion.
Mould release oil manufacturer tells that silicone is that type of mould release chemicals which will not damage the moulds of rubber, neither directly or indirectly. This kind of oil can be used in paver blocks, Door frames and also in rubber moulded products of concrete.

There are various shuttering oil manufacturers in India and mould release agent, they are manufacturing these oils and mould release for different kind of industrial use. For picking the best according to your need you have to gain thorough knowledge of different kinds of oil as some manufacturers are also supplying worst quality of used vehicle oil to their clients in the name of mould release oil, so it is very important to know exactly about the best quality of shuttering oil so you can receive value product in return of your harder money. 

Tuesday, 31 December 2013

Blow Apart Shuttering Oil To Gather Immense Pleasure On Constructing Facets

Shuttering oil is majorly used in timber works; metals, plywood and other similar materials enhance its look as well as improve its strength. It provides great strength of the material and it works effectively against the rust inhibitor. Beside to these benefits the shuttering oil is widely used in construction and hydraulic industry for various reasons. It is significantly used in those industrial sectors to increase the life if shutter. One of the most useful factor of the shutter oil is, it tremendously reduce the labor cost since it minimize cleaning process.  Since there are lot of shuttering oil manufacturers in India, before choosing these oil suppliers you should do enough market research to get a best business deal. Most of the manufactures are offering discount when the clients purchase it in a bulk order.

Aluminium shuttering is the prominent security feature that produces higher level security to your commercial as well as domestic premises. These are effective shutter that creates a barrier over doors and window. There are different kinds of aluminums shutter are available in the market, some of its notable varieties are punched aluminium shutter, flat aluminium shutter, and perforated aluminium shuttering. The aluminium shutter is only designed to emerge protection for your valuable properties like window and doors but also it provides an excellent look to them. The aluminiums shuttering is very significant for the commercial buildings in order to ensure the security factor.  The aluminiums shutter can be used in both exterior and interior windows in the commercial buildings. Such shutter is effectively fixed in the building windows and it produces elegant look to your valuable property. The aluminium shuttering exhibits close arrangements to the window so that it effectively blocks the sunlight and heat. Moreover the aluminums shutter is arrived with security locks it added additive protection phenomena for it. Being it is available in different shades designers it perfectly matches for your building structure. Therefore make use of the aluminiums shuttering through it improve your building durability.

The de shuttering oil is coated with the metal and plywood and it is vitally used in contraction works too. Basically the shuttering oil is extracted from the petroleum distillates. It is the blend of hydrocarbon and emulsifiers. It is highly used in various industries for the process of manufacturing the plastic, timbers and plywood materials. There are two common types of de shuttering oil are offered by the manufactures one is water based de shuttering oil and the other is oil based de shuttering oil. The de shuttering oil is the mixture of lubricating oil and fatty acid. It is the water soluble substance when it mixes the water it produce white emulsion it produce high lubricant to the coated materials. Such kind of de shuttering oil is used in the construction industry. The oil base de shuttering oil is the mixture of oleic acid, and petroleum that produces high viscosity to the constriction chemicals. Such kind of de shuttering oil is appears in yellow color that is easily soluble in diesel and kerosene.